Ben, I received the reworked bolt and firing pin- wow thanks for very fast service! Just like your video– “works perfect” and I am using Tula ammo. Many many thanks for great work- it was a pleasure working with you.
Hi, Ben Just got my parts back for my Sks. Works flawlessly thanks to you. I saw a lot of videos on “Slam firing ” and discussions on this matter. After your Firing pin modification,you have took a lot of worry off my shoulders. Needless to say the dependability of my Sks. Just wanted to say THANK YOU VERY MUCH! A very satisfied customer.
Ben, Just a short note to let you know I got the rifle back. No more popped primers! I do note that about 30% of the spent casings are showing a very small degree of cratering (Tula Ammunition, steel cases). Unless you tell me that this is a problem, I’m going to consider this rifle a 100% full up round and start having fun with it again. Thanks for all the help.
Mr. Murray, Thank you for doing a great job on my rifle. Finally got to take it out and put a few through it and found it will cycle anything I had thrown at it. I will say it was worth the wait. Hope the new year is good to you and yours. Thanks again!
Ben, I received my SKS bolt assembly today. The firing pin is working flawlessly. It was great doing business with you and I will recommend my friends. Thanks.
I just wanted to thank you guys for such a quality job and especially that it was delivered a few days early on an already rushed time frame. You guys rock, and my SKS has never ran better. Thanks again.
Ben, I bought an SKS just because I like the looks, the round, and it’s been 10 yrs since I’ve bought a gun. Got a “new” Yugo 59/66A1. Shot about 80% of the Wolf and Tula I put through it. While browsing the net for solutions I saw your “Firing Pin Fix”. Good idea for safety but cut me down to nearly 50% ignition. Rounds were well dimpled, but were just on that ragged edge of firing. I wanted to try a 34 lb hammer spring, but you talked me into a 31 lb. Put hammer spring in and fired 10 rounds with no failures. Re-installed your firing pin and pin spring. Fired several more. Now I have a numbers matching, good looking Yugo that shoots.
Thank you for an excellent product. Received in the mail today.. top notch quality! I will be ordering many more SKS parts from you for my upgrade work on my type 59/66. Thank you.
Installed your new valve for the old SKS and now she’s running like a champ! Great product. Thanks!
Want to say great job on the vent rib tool, I am a very experienced mechanic and have built and serviced guns many years . your tool is well thought out and super intuitive to use. I fixed my daughters a400 beretta shotgun she uses for sporting clays . and it took about ten minutes to open understand and use the tool slowly to make the rib perfectly flat against a metal ruler for accurate flatness. The under lug of the a400 vent rib required me to hold the jaws closed tightly to stay on the correct edge, but the repair is perfect and I have the tool to fix another problem if it comes up. I don’t know where the dent came from, but I was beyond upset when I saw the dent. I am beyond happy with your awesome product. Your company really helped me out. Thanks
NRA Shooting Instructor / Competition Shooter.