Testimonials

Ben – I finally got to the range with the 31LB hammer spring. I fired 120 rounds of:
Tulammo (20)
Golden Tiger (20)
TCW (40)
Brown bear (20)
Wolf Black Box (20)
I had no FTFs and the trigger pull was definitely better then with the stock spring. The better trigger pull made my groups a lot better. As before, the Wolf ammo had the hardest primers. I gave away the last of my Wold ammo and will no longer use it. Brown Bear is the most accurate and has the softest primers. Gold Tiger is a close second. This is the only ammo I will buy in the future. I will be buying another 31LB spring for my other SKS soon. It worked very well. Thanks

M.M.
Conway, MO

Hello sir, first I would like to say thank you for your service I am so happy. Well I have fired all my old old ammo no problem as well as some newer tule and some brown bear fired all of it perfect. The old ammo was pretty ugly looking with some corosion on primer but thought I might as well try it was Wolf ammo ate it up! feels good shoots great! Thank you.

Bob
Marysville, CA

I just wanted to commend you for your excellent product (Yugo gas valve) I was very skeptical as to wether a couple thousandths on OD and a few thousandths on OAL would make enough difference to cycle my yugo which was about 75% under cycled as far as my eyes could tell but it worked perfectly it now cycles 100% of the time. My biggest compliments are to the fact that you must have done some good research and development prior to offering this product which would require testing on several injured Yugos. Thanks again.

T.F.
Golden, CO

I JUST got back in the door from my first range trip using the x39 AR 15 MGI bolt which you relieved the sharp firing pin hole edges. I am pleased as punch to say that around 200 rounds were fired, all brass collected… and not ONE of them have a hole! I was waiting on a Caldwell Brass Catcher so I could be sure of reviewing all the spent brass from the Wolf ammo. This is the same batch of ammo that gave problems previously. Sometime in the next few days I will take some photos of the brass. The primer has a bit of a “cratered” look to it such as one would expect to see on over-pressure rounds, but I am sure this is just a side-effect of the recessing job you did on the bolt face, and not an indicator of over-pressure on this standard factory ammo. I can certainly live with that! Thanks very much for the EXCELLENT INSIGHT into the issue and the super job you did and so affordably as well. Never would have figured this out without your posting on the internet. Thanks again and MERRY CHRISTMAS! Mr. Murray – Hello and Merry Christmas! This past weekend I drove to another city to visit a friend and go to the range. Over two days, we put 400+ rounds through my x39 AR with the modified firing pin hole edge you did for me. The rifle functioned perfectly all weekend, not a single malfunction. Just wanted to give you the follow through… your fix worked! Take care and happy holidays to you and yours.

B.R.
Carmichael, CA

Hi and thank you so much. I purchased directly from you by picking from the shopping cart. Please add me to your testimonials with the following quote “Fast, professional and courteous service. Trigger assembly really improved the functioning of my sks.

J.L.H.
Riverdale, MD